Rean NYS 207

499

Start 360°

Vis oversættelse

Jack

2 Pole
Right angle
Height: 6.35 mm
Max. Cable diameter: 6 mm
Metal housing and plastic kink protection
Made by Rean (registered Trademark of Neutrik AG)

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Februar 2008

Artikelnummer 201815

salgsenhed 1 stk

Installation No

Mono/Stereo Mono

Angled Yes

Type TS (mono/unsym.)

Plug Jack 6,3 mm TS male angled

Vis varianter af dette produkt

499

Rean NYS 207

Rean NYS 207 Jack * 2 Pole * Right angle * Height: 6.35 mm * Max. Cable diameter: 6 mm * Metal housing and plastic kink ...

9,90 kr

til produktet

261

Rean NYS 202

Rean NYS 202 Jack Plug * 6.3 mm Jack * Stereo plug * Chrome-plated * Max cable diameter: 6 mm * Made by Rean (Registered...

11,90 kr

til produktet

298

Rean NYS 201

Rean NYS 201 Connectors * Jack mono * For cable with diameter of up to 6 mm * Made by Neutrik (Rean)...

8,90 kr

til produktet

Rean NYS 204

Rean NYS 204 Jack Plug * 6.3 mm * Stereo * Black plastic handle with flexible strain relief * For cables with diameter o...

9,10 kr

til produktet

273

Rean NYS 208

Rean NYS 208 Jack Plug * 6.35 mm, angled * 3-pin * Maximum cable diameter: 6 mm * Metal housing and plastic collet for k...

12,90 kr

til produktet

9,90 kr

Alle priser inkl. moms

Mængderabat

Stykpris	Du sparer	Mængde
9,90 kr		1
9,39 kr	5,2%	50
8,89 kr	10,2%	100

Salgsrang

i Jackstik/ -bøsninger 6,3mm

Kunder som så på dette produkt købte dette

Thomann SK140 Jack mono Angled

499 Kundebedømmelser

5 307 Kunder 4 148 Kunder 3 33 Kunder 2 8 Kunder 1 3 Kunder

4.5 / 5

forarbejdning

Retningslinjer for anmeldelser

180 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Buy this if You need angle connector 6.3mm

Alexandr Mardari 11.05.2021

Buy this if You need angle connector 6.3mm.
I used such designed angled connector named with different brands.
It was always good, never broken. It looks not beautiful, but it is more sturdy than every another design connector in compare. Just does it job well and fits from thin to thick cables. I always use many circles of duct tape above cable attachment point using thin cables, after it is impossible to break the junction.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Solid angled plug.

Mofosir 11.02.2025

While not as secure as a Neutrik, nor as slim, it does have it's advantages, precisely in it's size - it can easily accommodate a cable that's around 8mm. I've used this with the Cordial CGK Road 75 and it's almost too loose with it, and it's ~7.2mm, and I've used it with a recycled MXR Pro series cable that measures at 8.2mm, and it fits perfectly, The soldering area is ample and solder sticks to it well. The clamping mechanism is very simple, and though it is relatively sturdy, I'd avoid yanking the cable by itself but rather holding onto the plug. Overall - absolutely solid. If You need to fit a chonky cable and don't want to shell out for full blown neutriks it's a no-brainer, do recommend!

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Neutrik Quality made in China

Anonym 21.07.2014

I have used these plugs for several years now, soldering my own cables for my effects board and making instrument cables. The quality of these plugs is absolutely outstanding for this cheap price. I can hear or see no difference between these plugs and more expensive ones.

The only tricky part is soldering the mass contact to the plug, but with a little bit of excercise (probably after two or three cables), you will do just fine and have good, long lasting plugs for your instruments and effects for barely one euro.

You have to be careful though when using these plugs directly into your amplifier, because of the angled jack it sometims blocks other inputs (for example on my Laney IRT Studio)

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Anonym 11.06.2015

Very high quality for a cheap plug. Also very easy to solder, does not need a large amount of heat. The plastic looks weak, but it actualy is not. I have soldered on hundreds of them already onto the cables I make with no complaints. They easily over-last the cables they are soldered on. Highly recommended!!!

Anmeld bedømmelse

Læs alle anmeldelser

Rean NYS 207

Jack

Jack

Kunder som så på dette produkt købte dette

499 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

180 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Rean NYS 207

Jack

Jack

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

499 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

180 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator