Med vores cookies ønsker vi at tilbyde dig den bedst mulige shoppingoplevelse med alt, hvad der hører til. Dette inkluderer for eksempel passende tilbud, personlige annoncer og gemte præferencer. Hvis du er okay med dette, skal du blot acceptere brugen af cookies til præferencer, statistik og markedsføring ved at klikke på "I orden!" (vis alle). Du kan til enhver tid trække dit samtykke tilbage via cookie-indstillingerne (her)
Du skal være logget på, for at kunne vurdere et produkt.
BemærkVi tillader kun vores kunder, at afgive en vurdering af det udstyr de har købt hos os. Vi modtager ikke anmeldelser eller vurderinger af produkter fra tredje kilde.
Efter login finder du også i kundencenter under "vurderinger af produkt" alle artikler, som du kan afgive en vurdering af.
I had to build couple of flexible and solid XLR-to-Jack cables for portable TV studio set.
So, I purchased Fun Generation MIC 5 from Thomann, did cut it into two pieces and soldered Neutrik Rean NYS 201 after the needed diagram.
Result is perfect: I got Neutrik based, flexible adapter cables for more than reasonabe price.
forarbejdning
0
0
Anmeld bedømmelse
Anmeld bedømmelse
J
Might need some drilling
Jørg 08.01.2018
Cable entrance hole is a bit to narrow for standard size instument cables.
Neutrik Rean NYS 201
This is the first time I have used these Rean NYS 201 jack plugs but Neutrik is a well know brand name for audio connectors so I bought with confidence.
They are much cheaper than many other similar jacks and are superb quailty with a solid feel to them.
The outer part screws over the inner part and the only negative point I can see is that the two parts can unscrew quite easily, I add a little piece of PTFE to the threads and it keeps theme together nicely, (PTFE tape is used by plumbers for sealing the threads on pipe fittings !!! but works fine on jack plugs !!!)
A nice touch is the insulator sleeve which slides over the internal connections and prevents the inner core terminal shorting out with the outer cover.
The terminals solder easily and the cable clamp just crimps onto the outer cable sheath by squeezing with some pliers, very easy to install.
I added a short piece of heatshrink tubing to the end of the cable to add a little extra support to the cable where it enters the jack as this is where they usually break and it made the end more rigid and less likely to bend here and cause the inner cores to break.
I think in future I will another piece of slightly larger diameter heatshink tubing over the entire jack body and the first piece of heatshrink tubing to make a really solid job and this will stop the casing unscrewing without having to use the PTFE tape.
I got these for making my own patch cables along with 5m of cable. Very easy to set up, nearly a year on and 20 cables remain intact, no signs of the contacts failing or anything like that. Great price and have zero complaints