Med vores cookies ønsker vi at tilbyde dig den bedst mulige shoppingoplevelse med alt, hvad der hører til. Dette inkluderer for eksempel passende tilbud, personlige annoncer og gemte præferencer. Hvis du er okay med dette, skal du blot acceptere brugen af cookies til præferencer, statistik og markedsføring ved at klikke på "I orden!" (vis alle). Du kan til enhver tid trække dit samtykke tilbage via cookie-indstillingerne (her)
Du skal være logget på, for at kunne vurdere et produkt.
BemærkVi tillader kun vores kunder, at afgive en vurdering af det udstyr de har købt hos os. Vi modtager ikke anmeldelser eller vurderinger af produkter fra tredje kilde.
Efter login finder du også i kundencenter under "vurderinger af produkt" alle artikler, som du kan afgive en vurdering af.
I replaced the original Tune O Matic bridge on my Epiphone Emperor Swingster with this bridge. The original was of poor quality and made a buzzing and rattling sound, especially when played hard. Changed to this bridge and the buzz and rattling went away. Be aware that the post holes on this bridge are ment for 4mm post studs. I got several bridges from Thomann with 6mm holes which didnt fit my Epi Swingster. Also be awara that the individual saddles of the bridge are not possible to reverse or replace because of the design on this bridge. It may not be of much concern, but if you have intonation issues with your guitar you can not switch positions on the saddles to get wider range of intonation possibilities. Im not sure but I think the sustain increased after installing this bridge. The overall quality of this bridge is very good, and seems to be made after high level craftmanship standards.
the product fits perfectly.has excellent stability and provides very comfortable string hieght.the locking feature is very useful and works really well.this is a very good product and i am pleased with it.
Ersatz für die Gibson ABR1 Tune-O-Matic Bridge (mit Federbügel)
Stephan835 24.02.2010
Da Gibson bei seiner ES-335 Dot Reissue leider der Meinung war man müsse auch die alte Bridge mit der Klapperbügelfeder anbringen habe ich mir Ersatz bei Tonepros geholt. Leider ist es nicht richtig, dass der Durchmesser der original Standschrauben der Gibsonbridge passend zum Tonepro Ersatz sind. Die Gibson Schrauben haben einen geringern Durchmesser.
Da die T3BP-N aber mit 2 kleinen Inbusschrauben fixiert wird stellt dies kein Problem dar, denn der Druck zur Übertragung der Saitenschwingung kommt ja von oben und nicht von der Seite. Die Verarbeitung ist top und der Klang m.E. sogar hörbar besser, z.B. das Sustain. Klasse ist die per Inbusschrauben fixierte Brücke, die nicht mehr versehentlich abfallen kann und somit zu Beschädigungen an der Gitarre führen würde.
Also: Trotz Pass-Ungenauigkeit eine klare Empfehlung!