Harley Benton Parts PB BK Pickguard P-Style

211

Vis oversættelse

Pickguard

Suitable for P-style Bass
3-Ply
13 holes
Colour: Black

not suitable for Harley Benton PB-20 basses

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Maj 2005

Artikelnummer 181569

salgsenhed 1 stk

Colour Black

122 kr

Alle priser inkl. moms

Salgsrang

i P-style bas slagplader

Kunder som så på dette produkt købte dette

dAndrea P-Style Pickguard BK

251 kr

købt

Harley Benton Parts PB TT Pickguard P-Style

145 kr

købt

dAndrea PB-Pickguard Red Pearl

227 kr

købt

Fender Pickguard P-Bass BK

453 kr

211 Kundebedømmelser

5 87 Kunder 4 78 Kunder 3 29 Kunder 2 7 Kunder 1 10 Kunder

4.1 / 5

forarbejdning

Retningslinjer for anmeldelser

131 Anmeldelser

Cheap, does the job.

Mucho muchacho 15.08.2019

Almost fit my Squier P-Bass perfectly, although some holes were just a little out of alignment. It's a pickguard, and it works.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Doesnt fit Harley Benton HTR PJ4

OzzyBass 24.02.2020

Doesnt fit Harley Benton HTR PJ4

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Quick delivery

Doug I. 03.02.2016

I ordered this black pickguard to replace the white one on my Harley Benton PB-20 BK. I had read a previous review that said it fitted well. The guard arrived quickly and was well packaged. As usual it still had the protective clear film attached and close inspection showed a well made product. I had assumed that this would be a quick and simple replacement job. I was wrong.
Both guards have a small piece of foil attached to screen the electrics. This is slightly bigger on the new guard than the old. I removed the pots and socket and tried to fit to the new guard, at this point I noticed that the old one has location detents cut into it for the pot anti twist lugs. I did not feel confident in cutting these into the new guard and removed the lugs from the pots with side cutters. I then offered up the new guard and was surprised that it would not fit over the pick-ups as the holes were too small. I removed the electrics and compared the two guards. The new one has smaller cut-outs for the pick-ups and at least one of the screw mounting holes is in the wrong place. I decided not to return the guard to Thomann for a refund as there was enough guard to file and make fit. I did this and the new guard looks great. This may well be a 'one off' with the guard I was sent. I now have a black precision that matches my Harley Benton JB-70 Rosewood Deluxe jazz. I de-fretted the precision, installed maple veneer and then coated the fretboard with super glue, works really well.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

disapointed

Benjamin-H 13.02.2022

I wanted to replace the pick guard from the "Harley Benton PB-20 SBK Standard Series" with this one to get an all black look but when i tried to put it in place i found out the holes for the screws didn't match the holes on the bass guitar, not by much but not enough to fit.
I thought that because it's all thomann products it will fit without any problem but it didn't so i guess I'll just paint the one i have...

Anmeld bedømmelse

Læs alle anmeldelser

Harley Benton Parts PB BK Pickguard P-Style

Pickguard

Pickguard

Kunder som så på dette produkt købte dette

211 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

131 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Harley Benton Parts PB BK Pickguard P-Style

Pickguard

Pickguard

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

211 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

131 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator