Palmer WT PB 40 Multi Power Supply

Start 360°

Vis oversættelse

Multi Power Supply for Effect Pedals

Powerbar power supply with 8 outputs for Palmer Pedalbay 40
Can be completely and unobtrusively integrated into the pedal board by simply replacing the first crossbar
Output 1-6: 9V DC @ max. 300 mA (individually isolated)
Output 7-8: 9/12 / 18V DC @ max. 500 mA (individually isolated)
Max. Total power: 2000 mA
Power supply with a 12 V DC power adapter (included in delivery)
Dimensions (W x D x H): 450 x 50 x 24 mm
Weight: 650 g
Incldues cable from 5.5 x 2.1 mm coaxial connector to 5.5 x 2.1 mm coaxial connector: 5 pieces with a length of 16 cm and 9 pieces with a length of 60 cm

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden December 2019

Artikelnummer 480343

salgsenhed 1 stk

DC/AC current DC

Output current in mA 2000 mA

9 V Yes

12 V Yes

18 V Yes

Multi-output power supply Yes

969 kr

Alle priser inkl. moms

Salgsrang

i Trafoer

Pakker & tilbud

Harley Benton SpaceShip 40 Bundle

1.390 kr

63 Kundebedømmelser

5 51 Kunder 4 9 Kunder 3 1 Kunde 2 2 Kunder 1 0 Kunder

4.7 / 5

forarbejdning

Retningslinjer for anmeldelser

35 Anmeldelser

Den virker til at være af god kvalitet

Nicklas Rasmussen 28.02.2022

Jeg købte den i en samlet pakke med Harley Benton SpaceShip 40. De skulle være som skabt for hinanden. Den virker til at være af god kvalitet men Den er cirka 1,5 millimeter for lang, da det var utroligt svært at samlet boardet efter at jeg havde sat strømforsyningen ind hvor den skulle sidde. Det lykkedes at få den samlet men jeg ved ikke hvordan.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

saving space

rock94 09.04.2025

Very recomendable for anyone who's searching for a sturdy powersupply. That don't take up any precious space on your already limited pedalboard. I will never go back to a regular powersupply, after having installed this one, on my spaceship pedalboard. Good work Thomann.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Description not true

Philippe19670 13.12.2021

This is not correct and not honest as the pedal board length is 45 cm and the WT PB 40 is 45,5 cm so I had to adjust by drilling new hole as the pedal board frame was deformed, (longer at the top and shorter at the bottom), so the screw hole were not in place anymore.

NO it cannot be completely and unobtrusively integrated into the pedal board by simply replacing the first crossbar as they say.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Better than described

Dave McK 14.11.2020

This is a nice power supply that sits beautifully in my pedal rack and delivers plenty of power. I had a custom pedal that required a little more than the rated amperage and it works without a problem. The original power supply for the custom pedal was a constant nuisance, so this has worked better than expected for me.

Anmeld bedømmelse

Læs alle anmeldelser

Palmer WT PB 40 Multi Power Supply

Multi Power Supply for Effect Pedals

Multistrømforsyning til effektpedaler

63 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

35 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Palmer WT PB 40 Multi Power Supply

Multi Power Supply for Effect Pedals

Multistrømforsyning til effektpedaler

Tilbehør og matchende produkter

63 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

35 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator