ObsidianWire T 3-Way Universal Harness

Start 360°

Vis oversættelse

Solderless Electronics Replacement Set for Electric Guitar

For T-style electric guitars with humbucker
4 Optimised modes: HH, HS, SH & SS
Intelligent circuit: 500 kOhm for humbucker and 250 kOhm for single coil
Treble bleed prevents treble loss at low volume control settings
Controls: Volume, tone
Switch positions: 1: bridge, 2: bridge & neck, 3: neck
With the highest quality components for a significant improvement over standard electronics
Made in New Zealand

Delivery contents:

Volume control: 1 x CTS 500/250 kOhm, logarithmic, fine grooved split shaft (24 spline for US guitars & potentiometers)
Tone control: 1 x CTS 250 kOhm, logarithmic, finely grooved split shaft (24 Spline for US guitars & potentiometers)
Capacitors: 150 series polyester 0.022µF
Switch: Oak Grigsby 3-way switch
Jack socket: 6.3 mm mono

Fås siden Januar 2024

Artikelnummer 580493

salgsenhed 1 stk

Design Normal

Resistance Value 500/250 kOhm

Characteristic Curve Logarithmic

Thread Length in mm 9,5 mm

Tandem Poti No

Push/Push No

Solderless Yes

shaft type grooved

Type Switcher

Colour Silver

Vis mere

869 kr

Inkl. moms. Obs! Yderligere fragtomkostninger 45 kr

Afsendelse forventet fredag, 28.02.

Salgsrang

i Potentiometre

Kunder som så på dette produkt købte dette

ObsidianWire T 3-Way Vintage Harness

798 kr

købt

ObsidianWire T 3-Way Universal Spl. Harness

979 kr

købt

Allparts CTS 250K 9,5 Spl Aud.Taper Pot

75 kr

købt

Allparts CTS 500K Audio Taper Pot

75 kr

10 Kundebedømmelser

5 9 Kunder 4 1 Kunde 3 0 Kunder 2 0 Kunder 1 0 Kunder

4.9 / 5

forarbejdning

Retningslinjer for anmeldelser

9 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Recommended if you don't like soldering

mutaatio 01.01.2025

I'm not a fan of soldering so I decided to give this solderless harness a try in my new partscaster. It's a very crafty design, there is a small dial which you can use to set the desired resistance for each of the pickups separately, either 250K (single coil) or 500K (humbucker).

Instructions were quite simple, but after I assembled everything I got no sound. I checked every connection with multimeter and disconnected and reconnected everything. It took a while to find the problem: the output jack connector is very tight and there is a step before the input jack is in place. I thought I had the cable connected because of this, but in fact it was only in the first step and I had to push it ever further down.

Aside from the unusual input jack design, my only complaint is the quality of the quick connector for the pickup wires. It doesn't feel too sturdy and if you try out new pickups often, it might not last very long. The switch also has a bit of play in the lever, but works well enough.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

If you’re looking for flexibility…

Kokkaya 09.06.2024

This is the harness for you.
I wrote a rather neutral review for Obsidianwire earlier this year (for single cut harness) because of too soft of pots and mediocre 3 way toggle switch.
This time they nailed it. The cap is 0.22nF, which I like a lot for single coils and not many suppliers provide S or T type harnesses with 0.22. Plus, you can go 500K or 250K with pots. You can even assign 250 and 500 to different pickups thanks to the clever circuit. This is a very flexible and usable harness. Switch, output jack and solderless terminal are of good quality.
Important points that are not mentioned in the product description:
The pots are split shaft but solid shaft ferrules are included in the package! Which is a very good thing as you can use your screwed in standard tele knobs.
And switch screws are also included in the package. This is a huge bonus again. Switch tip was included in the single cut harness but is not included this time.
Overall, I like this purchase. Many thanks Thomann for carrying all this kinds of stuff.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Schnell, Gut und Effektiv

Marvin Fo. 07.04.2024

Habe mir das vorverdrahtete Bestellt da ich keine Lust hatte alles selbst zu verlöten. Faulheit kostet eben :)

Erstmal zum Umbau. Also die Anleitung die dabei ist, ist wirklich sehr einfach gehalten. Man sollte sich das ganze nur genau anschauen. Ich habe versucht die falsche Schaltung zu nutzen bis ich gesehen habe das es ja verschiedene Möglichkeiten gibt. Naja Augen aufmachen ;)

Alles eingebaut und getestet. Kein Rauschen und ein wunderbar klarer Ton. Ich bilder mir ja fast ein das es tatsächlich etwas besser ist als vom großen F.

Ich werde es für zukünftige Umbauten aufjeden Fall wieder kaufen! Klare Kaufempfehlung!

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Obsidian - Super qualité !

adzik67 14.10.2024

J'ai voulu tester ce kit sans soudure ; C'est un 10/10 pour moi, tout est de qualité et le rendu sonore est à la hauteur de mes attentes. C'est un poil excessif niveau prix mais sur le long terme, je crois que ça en vaut la peine.

Anmeld bedømmelse

Læs alle anmeldelser

ObsidianWire T 3-Way Universal Harness

Solderless Electronics Replacement Set for Electric Guitar

Kunder som så på dette produkt købte dette

10 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

9 Anmeldelser

Smart Navigator

Serveret med kærlighed!

ObsidianWire T 3-Way Universal Harness

Solderless Electronics Replacement Set for Electric Guitar

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

10 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

9 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator