Med vores cookies ønsker vi at tilbyde dig den bedst mulige shoppingoplevelse med alt, hvad der hører til. Dette inkluderer for eksempel passende tilbud, personlige annoncer og gemte præferencer. Hvis du er okay med dette, skal du blot acceptere brugen af cookies til præferencer, statistik og markedsføring ved at klikke på "I orden!" (vis alle). Du kan til enhver tid trække dit samtykke tilbage via cookie-indstillingerne (her)
Neumann Multichannel Extension for MA 1 (Download)
Upgrade version! Requires a registered license of Neumann MA 1 (item 508756)!
Extension for existing Neumann MA 1 hardware / software solution
Works with all network-compatible KH-Line studio monitors from Neumann
For Quad, 5.1, 7.1, 5.1.4 and 7.1.4 setups with up to 4 subwoofers
Allows precise acoustic calibration for immersive sound that works reliably on all compatible playback systems
Linearises the frequency response and optimises the localisation of the entire system
Generates a room-adaptive target curve with detection of room modes and automatic filter optimisation
Compensation of level and delay differences
Corrects spatial inadequacies of e.g. stereo control rooms for use in multi-channel playback
Helps to avoid changes in the sound character when panning sources and the associated misinterpretation of sound changes as directional information
Neumann Multichannel Extension til MA 1 (Download)
Opgrader version! Kræver en registreret licens af Neumann MA 1 (vare 508756)!
Udvidelse til eksisterende Neumann MA 1 hardware/softwareløsning
Fungerer med alle netværkskompatible KH-Line studiemonitorer fra Neumann
Til Quad, 5.1, 7.1, 5.1.4 og 7.1.4 opsætninger med op til 4 subwoofere
Tillader præcis akustisk kalibrering for fordybende lyd, der fungerer pålideligt på alle kompatible afspilningssystemer
Lineariserer frekvensgangen og optimerer lokaliseringen af hele systemet
Genererer en rumadaptiv målkurve med detektering af rumtilstande og automatisk filteroptimering
Kompensation af niveau- og forsinkelsesforskelle
Korrigerer rumlige utilstrækkeligheder af f.eks. stereo kontrolrum til brug i multi-kanal afspilning
Hjælper med at undgå ændringer i lydkarakteren ved panorering af kilder og den tilhørende fejlfortolkning af lydændringer som retningsbestemt information
Systemkrav
Version: 2
Format: E-Mail
License validity: perpetual
Copy protection: Online activation
Simultaneous activations: 1
Windows: from 10 (64-Bit)
Mac OS (64 Bit): from 10.15
CPU min.: AMD Multicore, Apple Silicon, Intel Core
Display: 1280 x 720
Additional System requirements: Internet Connection for Installation and Aktivation, Neumann MA 1 Microphone and Software from 2.0, Audio Output and LAN Port per Speaker
Fås sidenOktober 2023
Artikelnummer578897
salgsenhed1 stk
MIDI ToolNo
Audio ToolYes
Ear TrainingNo
ExpansionYes
Compatible To PCYes
Mac compatibilityYes
Download1
2.222 kr
inkl. dansk moms
Tilgængelig
Tilgængelig
For denne vare kan vi straks efter købet sende dig en download-licens via e-mail.
Du skal være logget på, for at kunne vurdere et produkt.
BemærkVi tillader kun vores kunder, at afgive en vurdering af det udstyr de har købt hos os. Vi modtager ikke anmeldelser eller vurderinger af produkter fra tredje kilde.
Efter login finder du også i kundencenter under "vurderinger af produkt" alle artikler, som du kan afgive en vurdering af.
5.1 KH 80 with KH750 sub tuned in no more than 20 minutes.
Had Sonarworks before but this feels a lot better to my ears.
Be mindful if you are using complex routing or an audio interface that does not have all the physical outs in order (in my case Audient iD44 with ADAT expansion) cause you may have to figure out a way to send the outputs in the correct order so the software sees them correctly.
For example the Audient id44 has 4 physical outputs and another 4 that goes to 2 separate headphones outputs, with that order you will not be able to calibrate 6 speakers as the software sees the outputs as groups of 6 like 1 - 6 or 3 - 8 ect.
Though that might be a problem at the time, maybe it will get fixed in the future.
Other than that, stored dsp calibration is amazing and it works magnificently with the neumann speakers.
Not a day goes by with seconds thoughts :)
Used with a 5.1 system in a smallish room (which can be tricky to get a balanced sound in) - using the MA1 isn't a quick process but the results are well worth the effort. Neumann seem to be updating the software fairly regularly, which is reassuring.