Til sidens indhold

Yamaha Adjustable Thumb Rest

12

Thumb rest

  • For B/A- clarinets
  • Adjustable
  • Silver plated
  • Suitable for Yamaha clarinets manufactured before 2014
Fås siden September 2009
Artikelnummer 235377
salgsenhed 1 stk
154 kr
Inkl. moms. Obs! Yderligere fragtomkostninger 45 kr
på lager
på lager

Produktet er på lager og klar til afsendelse.

Information om forsendelse
Afsendelse forventet onsdag, 19.03.
1

12 Kundebedømmelser

4.8 / 5

Du skal være logget på, for at kunne vurdere et produkt.

BemærkVi tillader kun vores kunder, at afgive en vurdering af det udstyr de har købt hos os. Vi modtager ikke anmeldelser eller vurderinger af produkter fra tredje kilde.

Efter login finder du også i kundencenter under "vurderinger af produkt" alle artikler, som du kan afgive en vurdering af.

forarbejdning

7 Anmeldelser

google translate gb
Der opstod en fejl. Prøv igen senere.
i
Fairly good just not quite perfect
in_space_no_one_can_hear_you_banjo 06.03.2025
The adjustable rest and strap loop are handy, and it's just two screws to fit it, which is super easy if you have a hand micro drill set.
Sadly the part could be better finished - although the outside is perfectly nice when fitted, the screws need to be pre-fitted in their countersunk holes before attempting to mount it on the instrument. The tiny holes are a little tight and when the screws bounce off their holes you'll probably drop them.

The adjustment screw needs to be very tight but there isn't a lot of space to fit a tool next to it when tightening. It seems like a coin slot rather than a screwdriver slot. I ended up using the handle of some tweezers to get it tight. So not super convenient for adjustment. Allen key adjustment would be better. The base screws (into my plastic clarinet) tend to come loose quickly too, and will need something like loctite to fix. I think three screws would be more stable.

At £17 you just get the part in a bag, with the screws and a 13mm circle of 1mm cork. It doesn't feel like £17 worth. But then, in clarinet world, it is cheap compared to the alternatives.
I didn't use the cork and instead fitted a B&G rubber on the end.
It is pretty comfortable in my limited experience. A worthwhile upgrade. Bear in mind it uses two screws spaced horizontally ~10.5mm center-to-center. You may need to drill or have someone fit it for you if different from your current setup.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse