Roadworx 4120B

Start 360°

Vis oversættelse

Keyboard Stand

For 4 keyboards
4 Support levels freely adjustable in height and inclination
With hand wheels
Interior width: 120 cm
Holder length: 69.5 cm (level 1), 45 cm (levels 2, 3 and 4)
Max. load capacity: 10 kg
Max. load capacity on lowest level: 35 kg
Total height: 139 cm
Weight: 16 kg
Colour: Black

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Februar 2023

Artikelnummer 547968

salgsenhed 1 stk

Keyboard Supports 4

979 kr

Inkl. moms. Obs! Yderligere fragtomkostninger 45 kr

Forventet levering mellem torsdag, 6.03. og fredag, 7.03.

Salgsrang

i Keyboardstativer

Kunder som så på dette produkt købte dette

Fun Generation Universal Stand

299 kr

købt

Hercules Stands KS410B Keyboard Stand

1.129 kr

43 Kundebedømmelser

5 24 Kunder 4 11 Kunder 3 7 Kunder 2 0 Kunder 1 1 Kunde

4.3 / 5

stabilitet

håndtering

forarbejdning

Retningslinjer for anmeldelser

32 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Great

Cadian 17.11.2023

Very sturdy stand lots of space for synths, only issue is the brackets that come with it cannot be taken off without dismantling. However the jaspers brackets fit perfectly and they can be put on without disassembling. I found it easy to build but the instructions could be much better. For the price point definitely 5 stars

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

A nightmare to put together

Larry Puddy 19.02.2025

Budget Jaspers alternative - half price if not even less.
I'm used to putting things together - Jaspers stands take me less than an hour with tweaks - to get everything right and locked in place.
The Roadworx took way much longer - 3 full hours.
And I'm still not happy and need to tweak a few things.
The only way to mount it correctly is to inspect the product photos on this site while mounting and mimic them since the instructions it came with are useless and in tiny, illegible print.
I went to the hard ware store to get extra screws since the 5-sided set of screws don't actually turn - this since the holes they're supposed to fit in are 5 sided too... better believe it.

The measurements of the stand once it's been assembled are a bit off :
it's much wider and deeper than most synths are.
The first two levels are too deep and all levels have empty space on the sides.

There are no extra parts you can buy to make it sturdier - this is a shame - just one extra horizontal bar would make the Roadworx stand more reliable and almost up to snuff with Jaspers.
What Jaspers stands come with that makes them so much sturdier and less accident-prone are the "lock-in" attachments to the horizontal bars - making it almost impossible for the synths to tilt or fall forwards or backwards.
You can buy Jaspers holders and mount them on the Roadworx stand - they share the same diameter size.
You could potentially buy a Jaspers horizontal bar as well - but the lengths are different, so you would have to buy the 150 size and saw it off to compatible length.

Bottom line : decent quality stand considering the low price point.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Excellent

lhckr 28.02.2023

This stand is a godsend for the price and the quality construction, fairly easy to mount and very stable at full load. It finally consolidated my setup in one place.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Not stable at all. Very little adjustment.

Martin9392 08.01.2024

Complex to set up and has a tendency to rotate under the slightest pressure. I have a M Audio Keystation 88 which barely fits widthways. A Korg Krome a Roland Gaia and a Modal Cobalt8X. The latter is relatively heavy and has a curved front to the underside. The only way possible to keeep this on the Roadworx 4120B is to put velcro strips on the supports and under the keyboard. otherwise it slips off immediately. That in itself is more of an issue with the Modal but this stand won't hold it without assistance.

Secondly I can put this on and tighten the 4 wheels for this row. (2 on the bar and 2 on the supports) as tight as I can and I have strong hands and in 10 minutes the Modal will be pointing downwards. The poles and supports may be strong in themselves but the brackets are next to useless.

Finally you cannot set this and reach synth controls. One of the sets of support is much longer. however 80% of that length goes back behind the pole. In fact the front part of this pair of supports is shorter than the others. Unfortunately you have to use this on the bottom rung as it is too deep to go anywhere else unless you want two metal rods sticking into your wall.

I found a half solution and that was to invert the long poles so they stick a long way forward and use velcro to hold on my keystation. Its not a deep keyboard but just too wide to fit between the poles on the normal brackets. The downside to this is with all the weight forward - the inadequate brackets let it constantly tilt forward especially if I play above pianissimo.

If you have a selection of small light keyboards - this would do the job (maybe). if you have anything substantial - look elsewhere.

Anmeld bedømmelse

Læs alle anmeldelser

Roadworx 4120B

Keyboard Stand

Kunder som så på dette produkt købte dette

43 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

32 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Roadworx 4120B

Keyboard Stand

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

43 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

32 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator